• kaseijin@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Nice. I’d replace the plastic buckle lock with metal ones, too, if you’re already opening up the joycon.

  • BennyInc@feddit.de
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Do they also have the „click“ on the up position? Amazon reviews are full of horror stories, and I hope that would get fixed.

      • Mechanize@feddit.it
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Let’s be clear, it’s really low risk, especially for such a low strength one, but some types of components can get damaged by it, or you could end up dislodging badly soldered or already damaged ones while you move the board around.

        In the worst case, if you dislodge them just enough to give you an intermittent problem, good luck debugging it.

        I just feel that it’s not worth risking it.

    • 9point6@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Yeah the sticks use magnets rather than any physical contact to determine their positions, so there is no risk of the kind of wear that causes drift

  • garretble@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Nice!

    My joycons - original ones even! - finally started to drift earlier this year, and I did the same thing replacing them with some hall effect ones. So far I’ve been really pleased with the results, though initially it was a little weird simply because the sticks themselves felt a tiny bit different than the original ones. But after using them for a bit they felt good.

    • shinjiikarus@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      My Joycons have survived BotW, AC:NH, Three Houses, Metroid Dread and Metroid Prime, which I all played religiously. But they finally started drifting during my early hours of TotK. I just bought the Gulikit ones, switched them in less than half an hour. Great experience, no complaints, just not drifting joy cons.

      • garretble@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Those are the same ones I installed in my joycons, too. And looks like the same ones in the photo on this post.

        I had the same experience with the usage, AND I played a lot of Smash Bros. on them which would, in theory, destroy them in no time. But they started to drift about two months before ToTK came out, and I couldn’t risk playing that all janky.

        • Leilys@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I played most of TOTK with a controller because my joycon camera drift really messed with the gyro. Got the hall effect sticks installed last week and I’m hoping this is the end of drift for me.

          I saw a few posts on twitter about these hall effect sticks still presenting with drift even with calibration. Not sure why, but I hope it’s just user error that can be corrected and not another hardware problem.

          • garretble@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I’ve had mine installed for at least a couple months now. Played a lot of Zelda with them, and so far I haven’t had any issues with them.

            For me it was worth a shot to try because it was cheaper than buying new joycons. And I didn’t want to send them off right before Zelda came out since I didn’t know when they’d come back (and they’d still be susceptible to drift later on).