cross-posted from: https://lemmy.world/post/1030687

EDIT: This PDF contains very detailed electrical information for the EEs who wanna go through the complaint: https://www.autoevolution.com/pdf/news_attachements/breaking-nhtsa-petition-shows-tesla-s-sudden-unintended-acceleration-is-real-and-curable-217525.pdf

Last year at /r/RealTesla, a Chinese video of a car rocketing at full speed for 1+ minutes before crashing / killing a pedestrian made the rounds. We all recognized it as one of the weirder cases of “Sudden Unintended Acceleration”, and I think that particular video really changed some minds.

https://www.republicworld.com/world-news/china/tesla-to-assist-police-probe-fatal-model-y-acceleration-incident-in-china-articleshow.html

While a lot of SUA events are from driver-error, it began a search into why Teslas seemed to be getting more SUA above-and-beyond the industry normal. This investigation (now filed under NHTSA) suggests that the ADC could be miscalibrated during a load-dump (or other electrical surge-like) scenario.

If the ADC associated with the accelerator pedal is off, then the Tesla will have the pedal at the wrong level of acceleration until the next calibration event, which is not going to happen until over a minute later.

This is extremely similar to that Chinese runaway Tesla, and perfectly seems to explain it. I’m glad that someone seems to have gotten to the bottom of this.

  • dragontamer@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    1 year ago

    As I said in my post, one community I follow (RealTesla) keeps track of this. Years ago there was this French case: https://www.bloomberg.com/news/articles/2021-12-16/why-the-ev-world-should-worry-about-unintended-acceleration

    And several other cases over the years, the Chinese case I linked above being one of the more recent ones I remember personally.

    This report changes everything. All of these events were dismissed by Tesla engineers recovering the black box and saying that the pedal was pushed the whole time.

    Alas, we now know that when the ADC miscalibrates, the Tesla computer thinks (for a few minutes) that the computer thinks the accelerator is pressed even when it isn’t pressed in reality. This complaint is very enlightening, we cannot trust the Tesla telematics / logs. The computer is wrong at the fundamental analog level before the data even leaves the ADC.

  • sky@lemmy.codesink.io
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Wow. I’d trusted NHTSA and the researchers who had looked over this previously. Tesla needs to get a software patch out for this calibration process immediately before I stop driving my car.

    Given that it’s an issue with the 12v systems I’d be inclined to wonder if newer cars with the lithium-ion low-voltage battery don’t have this issue?

    • dragontamer@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      The fundamental problem isn’t the battery per se. The problem (according to the .pdf) is the 300+ Amps the steering wheel is pulling to turn the car left-and-right inside of low-speed / traffic conditions. This is allegedly on the 12V line, but this fundamental issue will still be on the 48V line on newer cars.

      Now this problem is widely known, not only in car engineering circles, but also in EE circles. The fundamental problem is that Tesla engineers were ignorant to this problem and built millions of cars replicating this problem. When this issue was first identified in 2019, Tesla engineers (and NHTSA) were too ignorant to figure out the problem despite official complaints coming in.

      The issue is that Tesla engineers are incompetent and not deserving of our trust. They could have fixed the problem from the start (as all cars have this brownout problem on the 12V battery). They could have identified the problem in 2019 when the first rumors of the complaints came through. It should not have taken until today, 2023, for these poor users to hire a reverse-engineering expert to pull the firmware off of the Tesla PCBs and figure out what the hell was going on.

    • dragontamer@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      1 year ago

      https://static.nhtsa.gov/odi/inv/2020/INCLA-DP20001-6158.PDF

      In his petition and follow-up submissions, the petitioner identified a total of 232 non-duplicative complaints to NHTSA, including 203 reporting crashes.

      This is in response to a petition from 2019. 203 reported crashes to this issue, NHTSA rubber stamped Tesla and decided there was no problem.

      Now here we are 3 years later (Jan 2020 was when NHTSA responded), and now we’re seeing more proof of this problem, and 3-more-years (including the French driver + Chinese Driver, with huge numbers of injuries + fatalities) and who knows how many unreported cases.

      This problem allegedly affects all Model S, X, 3 and Y vehicles. Nothing less than a total recall on all Teslas ever made will fix this problem, as Tesla fundamentally replicated this faulty hardware across every car they’ve ever built.

      The only question in my mind is if NHTSA rubber stamps Tesla again and gives them a free pass, again. US Government has been awful at this, but with this level of evidence, the Chinese Government and French Governments are likely to get involved now. Even if USA does the wrong thing, I’m hoping some country out there gets it right.


      This is incredible evidence that required reverse engineering of Tesla’s sensors and the damn firmware of those chips hanging off the CAN bus. I don’t think the NHTSA can so easily brush off this complaint anymore.

      • chowder@lemmy.one
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        Ever since I learned where the manual door release was originally placed, their claims of safety meant nothing to me.

        • dragontamer@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Elaine Chao’s (aka: McConnell’s wife) Department of Transportation was a well known rubber-stamp factory too with regards to safety issues.

          People also need to recognize that Republicans don’t like leaders who actually check on safety issues. We have the Democrats in power and therefore Pete Buttigieg. I’m hoping he does the right thing here.

          • chowder@lemmy.one
            link
            fedilink
            English
            arrow-up
            0
            ·
            edit-2
            1 year ago

            Its hard for me to pin this solely on the Republicans when a vast majority of Tesla was built in California, and founded on our subsidies.

            Dude took hella money from California then started to talk shit after he left.

            Also I miss r/realtesla

            • dragontamer@lemmy.worldOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I do think that Democrats turn their brains off if you say its “Green Technology”. But this is an obvious safety issue, and historically Democrats are more for keeping ya know… regulators actually regulating?

              Republicans have a point about when regulations go too far and hamper innovation / etc. etc. But this safety issue got through Chao and her department in 2019 and 2020. That’s fully on them for making NHTSA incompetent in the time of need.