I have some drives of various sizes, 1TB, 2TB etc. I am currently working with a 2 TB drive. I place it in a powered external USB-3 drive enclosure. I can see it in lsblk as the correct size (as SDA) , but the disk manager does not see /dev/sda, and fdisk only wants to let me create a 5 GB partition.

If I dd if=/dev/zero of=/dev/sda bs=400K status=progress writes 5 GB and claims my 2 TB drive (In this case) is full.

Is there a way to reclaim this drive? Any information on the drive is unimportant.

  • WasPentalive@lemmy.oneOP
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago
    smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-24-generic] (local build)
    Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF INFORMATION SECTION ===
    Model Family:     Western Digital Green
    Device Model:     WDC WD20EZRX-00D8PB0
    Serial Number:    WD-WMC4M1881301
    LU WWN Device Id: 5 0014ee 6042454e9
    Firmware Version: 80.00A80
    User Capacity:    2,000,398,934,016 bytes [2.00 TB]
    Sector Sizes:     512 bytes logical, 4096 bytes physical
    Rotation Rate:    5400 rpm
    Device is:        In smartctl database 7.3/5319
    ATA Version is:   ACS-2 (minor revision not indicated)
    SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
    Local Time is:    Fri Jul  7 04:43:34 2023 PDT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x82) Offline data collection activity
                                            was completed without error.
                                            Auto Offline Data Collection: Enabled.
    Self-test execution status:      (   0) The previous self-test routine completed
                                            without error or no self-test has ever 
                                            been run.
    Total time to complete Offline 
    data collection:                (27360) seconds.
    Offline data collection
    capabilities:                    (0x7b) SMART execute Offline immediate.
                                            Auto Offline data collection on/off support.
                                            Suspend Offline collection upon new
                                            command.
                                            Offline surface scan supported.
                                            Self-test supported.
                                            Conveyance Self-test supported.
                                            Selective Self-test supported.
    SMART capabilities:            (0x0003) Saves SMART data before entering
                                            power-saving mode.
                                            Supports SMART auto save timer.
    Error logging capability:        (0x01) Error logging supported.
                                            General Purpose Logging supported.
    Short self-test routine 
    recommended polling time:        (   2) minutes.
    Extended self-test routine
    recommended polling time:        ( 276) minutes.
    Conveyance self-test routine
    recommended polling time:        (   5) minutes.
    SCT capabilities:              (0x7035) SCT Status supported.
                                            SCT Feature Control supported.
                                            SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
      3 Spin_Up_Time            0x0027   177   173   021    Pre-fail  Always       -       4141
      4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4416
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
      9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       8602
     10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3624
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       100
    193 Load_Cycle_Count        0x0032   088   088   000    Old_age   Always       -       338427
    194 Temperature_Celsius     0x0022   119   104   000    Old_age   Always       -       28
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short offline       Completed without error       00%      8602         -
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.