I have some drives of various sizes, 1TB, 2TB etc. I am currently working with a 2 TB drive. I place it in a powered external USB-3 drive enclosure. I can see it in lsblk as the correct size (as SDA) , but the disk manager does not see /dev/sda, and fdisk only wants to let me create a 5 GB partition.

If I dd if=/dev/zero of=/dev/sda bs=400K status=progress writes 5 GB and claims my 2 TB drive (In this case) is full.

Is there a way to reclaim this drive? Any information on the drive is unimportant.

    • WasPentalive@lemmy.oneOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago
      smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-24-generic] (local build)
      Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
      
      === START OF INFORMATION SECTION ===
      Model Family:     Western Digital Green
      Device Model:     WDC WD20EZRX-00D8PB0
      Serial Number:    WD-WMC4M1881301
      LU WWN Device Id: 5 0014ee 6042454e9
      Firmware Version: 80.00A80
      User Capacity:    2,000,398,934,016 bytes [2.00 TB]
      Sector Sizes:     512 bytes logical, 4096 bytes physical
      Rotation Rate:    5400 rpm
      Device is:        In smartctl database 7.3/5319
      ATA Version is:   ACS-2 (minor revision not indicated)
      SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
      Local Time is:    Fri Jul  7 04:43:34 2023 PDT
      SMART support is: Available - device has SMART capability.
      SMART support is: Enabled
      
      === START OF READ SMART DATA SECTION ===
      SMART overall-health self-assessment test result: PASSED
      
      General SMART Values:
      Offline data collection status:  (0x82) Offline data collection activity
                                              was completed without error.
                                              Auto Offline Data Collection: Enabled.
      Self-test execution status:      (   0) The previous self-test routine completed
                                              without error or no self-test has ever 
                                              been run.
      Total time to complete Offline 
      data collection:                (27360) seconds.
      Offline data collection
      capabilities:                    (0x7b) SMART execute Offline immediate.
                                              Auto Offline data collection on/off support.
                                              Suspend Offline collection upon new
                                              command.
                                              Offline surface scan supported.
                                              Self-test supported.
                                              Conveyance Self-test supported.
                                              Selective Self-test supported.
      SMART capabilities:            (0x0003) Saves SMART data before entering
                                              power-saving mode.
                                              Supports SMART auto save timer.
      Error logging capability:        (0x01) Error logging supported.
                                              General Purpose Logging supported.
      Short self-test routine 
      recommended polling time:        (   2) minutes.
      Extended self-test routine
      recommended polling time:        ( 276) minutes.
      Conveyance self-test routine
      recommended polling time:        (   5) minutes.
      SCT capabilities:              (0x7035) SCT Status supported.
                                              SCT Feature Control supported.
                                              SCT Data Table supported.
      
      SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
        1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
        3 Spin_Up_Time            0x0027   177   173   021    Pre-fail  Always       -       4141
        4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4416
        5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
        7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
        9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       8602
       10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
       11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
       12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3624
      192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       100
      193 Load_Cycle_Count        0x0032   088   088   000    Old_age   Always       -       338427
      194 Temperature_Celsius     0x0022   119   104   000    Old_age   Always       -       28
      196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
      197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
      198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
      199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
      200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
      
      SMART Error Log Version: 1
      No Errors Logged
      
      SMART Self-test log structure revision number 1
      Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
      # 1  Short offline       Completed without error       00%      8602         -
      
      SMART Selective self-test log data structure revision number 1
       SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
          1        0        0  Not_testing
          2        0        0  Not_testing
          3        0        0  Not_testing
          4        0        0  Not_testing
          5        0        0  Not_testing
      Selective self-test flags (0x0):
        After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.