Fixed:
Dude… That’s even worse
Not perfect, but I did it on my phone, so she me ;-)
Consider yourself she’d :p
Yeah now the handles point in different directions.
It would be worse if its the right direction but still the wrong orientation, seeing as the line is not centered.
CSS noob vs CSS grandmaster
We need to edit the CSS of reality
I say we go flex this time
Correct:
Is no one else going to talk about how weird it is to see a square manhole cover? Now there’s a risk of dropping the cover down the hole due to the shape.
It’s not a manhole, it’s way too small. But yeah not sure why it’s square. Could be European, they do weird stuff like that all the time.
You’re right. OP called it a manhole, so I assumed. But looking at the size compared to the foot, it’s too small to be a manhole cover.
It’s probably a hand hole for accessing a pipe or cable junction, likely smaller because it’s where business or homes hook in. I work for an ISP, and most of ours are about this size
Might be a valve or fire hydrant underneath
It’s next to a drainpipe…
Square covers like this are common globally. AFAIK also in the US:
https://manholecoversdirect.com/products/square-manhole-covers-and-frames/
Setting square tiles or paving stones around a circular cover is a pain in the ass.
But it wouldn’t be the first time the US is weird, like the whole imperial measurements thing, so whatever. Or maybe you live in a state that decided square manhole covers were biblically incorrect.
For a while in the programming world “why are manhole covers round?” was a common question to be asked in interviews. I had no fucking clue the first time I was asked, but subsequently I would put on my deep pondering face and reason through it out loud and arrive at the correct answer, which never failed to impress the interviewer. After a few years I started owning up to the fact that I (and everyone else) had already heard that question.
Knowing that I never saw a manhole cover with a stripe facing the right direction, I’m pretty sure, they do it intentionally.
They don’t make enough and they want to spread pain
I choose to believe this one was done specifically to fuck with OP and ruin their day.
My expectation is maintenance workers, who have to get in there for some reason, do it to mark the ones they have already done.
If you look at the top one, the hook to remove it is oriented the same way.
That’s close to what I’ve read on reddit years ago - that they do it on purpose do that it’s easier to find the cover the next time it needs service.
deleted by creator
The summoning circle is broken! You’re free!
Don’t be lazy.
Get a cable tie or some tongs, pull it out, rotate it, done.
Less effort than it took to take this picture and post it on here.
easy peasy. just lift the 100 kilo chunk of iron with some tongs. /s
- manhole covers are heavy af
- if improperly handled they can take your finger in an instant
- that square cover might be able to fall into whatever it is covering.
If that were an actual manhole you’d be right, but its obviously not.
- No
- No
- No
- Manhole covers are not heavy as fuck. They’re meant to be able to lift out. I’ve lifted far larger ones than this no problem.
- This manhole cover is at most 30x30cm judging by OP’s foot, so weights at most a few kilos.
- This is a small cover, probably covering a drain, not a hole to the centre of the earth. I have a few around the house. Cable tie, piece of string, lift it out no problem. You lift and slide it aside, it’s not going to fall in unless you’re a complete moron or drunk. If it does fall in, you pull it out, because it doesn’t weigh 100 kg.
- If you’re worried that this would take your finger off, you’re the kind of person who should hire an electrician to change a light bulb.
They really aren’t that heavy. When I was little, maybe 5 or 6, me and my best friend went to a construction site (excavators and cranes, so cool), snuck around on there during off hours (probably super dangerous, but here I am) and took some metal hooks, made from that metal grid stuff they use often in construction.
We then went and opened the actual manhole covers in my backyard with them, and even climbed down there (not that interesting, basically a few meters deep, with a small open sewage line running at the bottom).
Long story short, two pre school boys could open them by themselves in the 90s
Because 10lb is so heavy
Plot twist: OP is actually the one who twisted this into the wrong orientation in the first place
🤣
There’s a risk that if you try to turn the square cover that the cover will fall into the hole. It’s really strange that it’s square and not round.
I’m pretty sure the reason is that the hole isn’t deep enough for it to matter. That’s nowhere near big enough to be a manhole.
deleted by creator
deleted by creator
It’s really strange that it’s square and not round.
It’s not even slightly strange. These are incredibly common all across Europe and the world.
It’s a small cover, almost certainly to service the nearby drainpipe or perhaps for the water or gas connection to a house.
The chance of it falling in the hole is zero unless you’re trying to do it on purpose. Lift and slide, done.
And even if it does fall in, you can simply reach in and pull it out.
That’s not how geometry works
Yes it is. In any rectangle, by definition the diagonal cross section will always be longer than the longest side. Therefore given that this is a relatively 2d shape in 3 dimensional space, it will be able to pass through the hole.
Depends. The cover is resting on the inside lip which prevents moisture getting in. Ie. this cover is actually significantly bigger than the hole it’s covering.
Eg. if this cover is 25x25, but it’s covering a hole which is less than 18x18 (c=25.5), it’ll be quite hard to drop the cover in.
deleted by creator
The problem is the hole is smaller than the cover. If they were the same size it would fall though
I think you’re misunderstanding. Yes, it cannot fit in when it’s angled properly to fit into the hole. However, if you angle the plate 45 degrees and lift one end of the plate, it will fall into the diagonally. That’s why manholes are round shaped. There is no angle for a round cover to fall into the hole itself.
You are right, never mind. I was thinking Pythagorean theorem
Yes it is
Or do it to post a picture
But that wouldn’t be /c/mildlyinfuriating
Is it now…? Then go ahead and fix it if it is really “more than mildly infuriating”.
They probably did it on purpose - i would have lol
Square holes are asinine, so easy for them to get dropped in.
Came here to say something but everyone already said it.
You do in fact exist in the world, you aren’t a bystander, you can actually do things like turning the manhole cover.
They did. Then they took a picture and posted it here to outage everyone.
OP, is that Spain?
Italy
deleted by creator
Someone deffo turned it after it was already put down to get this
The line looks like it’d fit if the square was rotated, so that means someone picked up the cover and either intentionally or unintentionally put it back down with the line going in the other directions instead of back in line with how it was painted
Common sense is way too much for people. I too think it’s likely for someone to have placed it incorrectly so that a glance they would know if they had already accessed what was inside.
I am genuinely confused if people are down voting because they want to believe it was painted wrong or if they think what I said was so obvious that it’s stupid to write it out
Just want to be mad at something I guess.
